Instructions / Assembly

9
ASSEMBLY INSTRUCTIONS
Hardware Used
7
8
7. Install the glass tube (F). Carefully install
the glass tube between central of top plate
and control box assembly. Make sure to place
the lower end of the glass tube between the
three clips on the control box assembly.
8. Lean the heater carefully. Install 3pcs
studs (CC) on the top plate,secure them with
3pcs M8 cap nuts (II). Assemble the mesh
base to the stud,secure them with 3pcs
M8 nuts (HH). Secure the mesh to the mesh
base with 3pcs Screw M5X12(DD).
CC
II
DD
F
HH
CC
x 3
x 3
Nut M8
Make sure
the end of
glass tube
is inserted in
three clips of
control box
assembly.
Stud
II
x 3
Cap nut M8
HH
DD
x 3
Screw M5 X 12