Palermo -OUTDOOR PATIO HEATER- WARNING IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. WARNING Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. An LP-cylinder not connected for use shall not be stored in the vicinity of this or any other appliance WARNING FOR OUTDOOR USE ONLY CAUTION: Consumer: Please keep this manual for future reference.
TABLE OF CONTENTS Table of Contents.................................................................1 Package Contents............................................................ 2-3 Safety Information.............................................................. 4 Assembly Instructions................................................... 5-11 Operation Instructions...................................................12-14 Care And Maintenance......................................................
PACKAGE CONTENTS A B A C D E F G H I J K L M N O PART A B C D E F G H I J K L M N O -2- DESCRIPTION Reflector Panel Reflector Plate Head Assembly Gas Hose Regulator Upper Deck Cover Lower Deck Cover Upper Wicker Cover Middle Wicker Cover Deck Cover Bracket Upper Pole Lower Pole Cylinder Housing Wheel Kit Base QUANTITY 6 2 1 1 1 1 1 1 1 2 1 1 1 1 1
PACKAGE CONTENTS AA M8 Flange nut Qty. 2 JJ Washer Qty. 18 BB CC Bolt M8 x 14 Qty. 2 Bolt M8 x 16 Qty. 5 KK LL DD EE FF GG HH II M6 Bolt M6 X 12 Screw M4 X 10 Flange 3/16 Screw Stainless steel Stainless steel nut Qty. 4 Qty. 4 Qty. 8 Bolt Bolt Qty. 2 M6 x 30 M6 x 45 Qty. 4 Qty. 2 MM Cap nut Screw Qty. 18 M6 X 10 Qty. 12 Qty. 18 NN OO PP Wing nut Qty. 3 Reflector Reflector spacer spacer Qty. 3 Qty. 3 QQ Philips screwdriver Qty. 1 RR Wrench Qty.
SAFETY INSTRUCTIONS DANGER DANGER • EXPLOSION - FIRE HAZARD • Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions. • Provide adequate clearances around air openings into the combustion chamber. • Never use the heater in spaces which do or may contain volatile or airborne combustibles, or products such as gasoline, solvents, paint thinner, dust particles or unknown chemicals.
ASSEMBLY INSTRUCTIONS Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 60 minutes Tools Required for Assembly (not included): Phillips screwdriver w/ medium blade. Leak Detection Solution. Assemble the wheel kit.
ASSEMBLY INSTRUCTIONS 4. Assemble the upper pole. Insert the upper pole into the lower pole. Make sure the upper pole do not up side down. The up side should have four closer holes from the end. Line up the holes and secure them with 4pcs 3/16 screws. 4 K FF Hardware Used FF 3/16 Screw x4 5. Put the 2pcs M6x45 bolt through the hole of the bracket inside the middle wicker cover at the lower end, secured with 2pcs M6 nut underneath.
ASSEMBLY INSTRUCTIONS 7. Assemble the upper wicker cover. Put the upper wicker cover though the pole and push it to the end. 7 8. Put the lower deck cover through the upper wicker cover. Make sure the wider opening is facing down. Then put the upper deck cover through the upper wicker cover. Make sure the wider opening is facing up. 8 9. Insert hose of head assembly into pole. Line up the holes on head assembly to the holes on pole.
ASSEMBLY INSTRUCTIONS 10. Assemble the deck cover bracket. Secure the deck cover and bracket to the pole with 4pcs M6X12 bolts. This step also secures the head assembly to the pole. 10 J HH Hardware Used HH Bolt M6 X 12 x4 11. Secure the upper deck cover. Push the upper deck cover upwards until it is flat against the head assembly. Line up the holes on upper deck cover to the holes on deck cover bracket. Secure them with 2pcs M4 X 10 screws. 11 II Hardware Used II Screw M4 X 10 x2 12.
ASSEMBLY INSTRUCTIONS 13. Slide two reflector panels together. Insert one screw M6 X 10. Slide one washer over threaded end of screw M6 X 10 and screw on cap nut loosel y. 13 6 Hardware Used LL x9 JJ JJ KK KK Screw M6 X 10 x9 LL Cap nuts x9 14. Slide reflector plate onto reflector panels . Insert one screw M6 X 10 . Slide one washer 6 over threaded end of screw M6 X 10 and screw on cap nut loosely. Repea t procedure to comple te the assembl y of all four sections.
ASSEMBLY INSTRUCTIONS 16. Screw the regulator to the hose. Install the gas cylinder Open the door and put the gas cylinder onto the base, then secure it with gas cylinder secure belt. And then screw the regulator to the gas cylinder contector. WARNING: Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See chapter 5 of the standard for storage and handling of liquefied petroleum gas, ANS/NFPA 58.
ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the standard for cylinders, spheres and tubes for transportation of dangerous goods and commission, CAN/CSA-B339.
OPERATION INSTRUCTIONS WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the heater until all connections have been leak tested and do not leak. Hose / Regulator connection Regulator / Cylinder connection 1. Make 2-3 oz. of leak check solution (one part liquid dishwashing detergent and three parts water). 2. Apply several drops of solution where hose attaches to regulator. 3.
OPERATION INSTRUCTIONS DANGER • CARBON MONOXIDE HAZARD • For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed. Before Turning Gas Supply ON: 1.
OPERATION INSTRUCTIONS 3. Push in gas Control Knob and turn counterclockwise to “IGNITER” then to “PILOT” (Figure b) to light the pilot. If needed, keep depressing and turning Control Knob counterclockwise until the pilot lights (You should hear 2 clicking sounds). 4. Once the pilot is lit, continue to depress the Control Knob for 30 seconds. 5. If the pilot dose not stay lit, repeat steps 3 and 4. Figure c 6.
CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Heater does NOT reach the desired temperature. Heater glow is excessively uneven. Heater makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear away smaller particles. Carbon deposits may create a fire hazard.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Cylinder valve is closed Open valve Clean or replace orifice or pilot tube Open gas line and bleed it (pressing control knob in) for not more than 1 - 2 minutes or until you smell gas Blockage in orifice or pilot tube Pilot won’t light Air in gas line Note: Heater operates Low gas pressure with cylinder valve fully open at reduced efficiency below 40ºF (5ºC) Igniter fails Turn cylinder valve OFF and replace cylinder Use match to light pilot;
DISCOVER MORE AT WWW.LAVAAIRE.COM AVIATOR X2 OASIS BELLA TRIO BELLAGIO AMIT FANTOM WWW.LAVAAIRE.