Instructions / Assembly
Hardware Used
JJ
KK
LL
13
13. Slide two reflector panels together.
Insert one screw M6 X 10. Slide one washer 6
over threaded end of screw M6 X 10 and
screw on cap nut loosely.
14. Slide reflector plate onto reflector panels.
Insert one screw M6 X 10 . Slide one washer 6
over threaded end of screw M6 X 10 and screw on
cap nut loosely. Repeat procedure to complete
the assembly of all four sections. Fully tighten all of
the screws in the rolled edge.
15. Reflector Assembly
Screw 3pcs of male thread spacer into the holes on burner
or
assembly to head assembly and place 3 pcs washers.
Secure with spacer of female thread.Attach reflector to
the spacers then secure with wing nuts.
x 9
x 9
x 9
Hardware Used
MM
x 12
Screw M6 X 10
JJ
KK
Cap nuts
LL
LL
JJ
KK
14
15
NN
OO
x 3
x 3
Reflector spacer
Reflector spacer
PP
Wing nut
x 3
MM
OO
NN
PP
ASSEMBLY INSTRUCTIONS
-9-