Use and Care Manual

6
6. Re-Install the protective steel guard (E)
by hanging it on the upper support slots.
Next, secure it with 1of the M5x12 screws
and 1 of the fixing brackets (GG).
Hardware Used
DD
GG
GG
x 3
x 3
x 1
Fixing Bracket
PP
Philips
screwdriver
Screw M5 X 12
E
5
5. Now that you have properly and carefully
removed all transit protection materials from
the unit, you will need to place the unit back
in its original proper order. We will revisit the
last several steps in reverse order. First,
re-install the boroscilate glass tube (F).
Carefully install the boroscilate glass tube
between center of the top plate and the
control box assembly as illustrated.
Make sure to place the lower end of the
glass tube between the three metal clips
located on the control box assembly.
F
Make sure
the end of
glass tube
is inserted in
three clips of
control
box
assembly.
8
ASSEMBLY INSTRUCTIONS