Instructions / Assembly

8
ASSEMBLY INSTRUCTIONS
Hardware Used
MM
MM
D
x 4
x 1
PP
Philips
screwdriver
Screw Ø8×10 mm
6
5
5.You will need to remove at least one of the
three protective steel guards (D) in order to
safely remove the bubble rap and foam
material from the boroscilate glass tube
located in the center of the unit. Unscrew all
(4) of the MM Ø8×10 mms screws, then remove
the protective steel guard from its supports
slots. Now that you have properly and carefully
removed all transit protection materials from
the unit, you will need to place the unit back
in its original proper order.Re-Install the
protective steel guard (D) by hanging it on the
upper support slots. Next, tightly secure it with
all (4)of the MM Ø8×10 mm screws in to their
orginal support slots accordingly.
6. Propane Only-Proper Hose Connection.
WARNING! Ensure the hose does not contact
any high temperature surfaces, or it may melt
and leak causing a fire.