LAVA INTERNATIONAL (H.
Content Your phone & Key parts ............................................................................................. 1 Getting Started .......................................................................................................... 2 Remove the SIM card and SD card .......................................................................... 2 Inserting the SIM card and SD card ......................................................................... 3 Switch On/Off ..........................
SIM Toolkit .............................................................................................................. 7 Downloads .............................................................................................................. 7 Backup and restore ................................................................................................. 7 Settings ...................................................................................................................
©2014. All rights are reserved. No part of this document may be reproduced without permission. While all efforts have been made to ensure the accuracy of all the contents in this manual, we assume no liability for errors or omissions or statements of any kind in this manual, whether such errors or omissions or statements resulting from negligence, accidents, or any other cause. The contents of this manual are subject to change without notice.
Camera 6 Flash1 light Camera Lens Flash light Standby Screen & Icons This phone provides multiple Standby screens. Through the instruction and various icons on the screen, you can have the operating information needed.
Inserting the SIM card and SD card Make sure that the clipped corner of the SIM card is facing the correct direction, push the SIM card into the card slot until it stops. Switch On/Off Long press the power key to switch on/off the phone. After inserting the SIM card, the screen will show the notes in the following order when the phone is switched on: If you have already set the SIM code, please type in PIN. Search— The handset will be searching for proper network connection.
Ensure the battery inserted in the handset. To charge the battery, plug in the charger connector at the bottom of your phone (USB interface) and then plug the other end into an AC power socket. The battery symbol indicates the charging status. While charging, the charge indicators will scroll. When all the scroll bars are steady, the battery is fully charged. Disconnect the charger from the phone. Disconnect the charger from the AC power socket.
there will be "Emergency Calls" on the lock screen. If you are in the network coverage, you can have emergency calls even without a SIM card. Answer Calls Drag the icon to answer an incoming call. If your headphone is connected to the handset, you can use the headphone key on the headphone answer calls. Attention: A short press of the headphone key will answer the call while a long one will refuse to answer the phone.
time. Press alarm of list to edit the activation, Time, Ringtone, vibrate and label. If you want to delete the alarm, long press on the list and choose the alarms that needs to be deleted and click in Delete icon. . Camera Under viewing condition, press the top icons to do the following operations. 1——facebeauty mode. 2——Change to FaceBeauty Camera.
SIM Toolkit The contents in this menu will differ according to different network providers. For detailed information, please check inside the menu. Downloads You can check the downloaded or being‐downloaded contents. Backup and restore You can backup the materials and restore them. Settings Wi‐Fi Connect to a wireless network by entering the correct password. You can then access internet over WiFi instead of Mobile data.
Date & time Include Automatic date & time, Automatic time zone, Set date, set time and so on. Schedule power on/off You can set the time for ON/OFF, which include setting time and repeated date. Printing Connect printer to realize print function sound You can change the volumes and system sound, choose the ringtone and vibrate .
Please check if the sound volume is tuned improperly Poor quality of calling In an area with poor receiving condition, example: basement, the signal might be weak. Try reaching a location with stronger signal reception and call again. While using the mobile phone in the peak period of communication, like commute time, you may be unable to call because of line congestion. The standby duration is relative to the system setting of network.
Safety Information and Notices Emergency call If any emergency arises, dial 112 (or other emergency call number) for emergency help. Note: Due to the nature of cellular networking, the success of emergency call is not guaranteed. For your safety Switch off the phone in hospitals and aircraft. Obey any restrictions. Wireless devices can affect the medical Some medical devices such as hearing aids and pacemaker may be sensitive to external radio frequency emissions.
Use only damp cloth or non‐static cloth to clean your phone. Do not use alcohol, thinner, benzene or other chemicals or abrasive cleaner to clean your phone. The phone will become warm under normal use and while in battery charging. Do not leave the phone with battery uninstalled or with the battery empty for a long period of time. This may cause data loss. The metal parts of the phone may irritate your skin depending on your health condition. Do not put the phone in the back pocket.
Ensure that an Authorized Person repairs your Lava products Call Our Local Authorized Collection Centers to Dispose Lava products Always drop your used electronic products, batteries or any accessories thereof after the end of their life at nearest Authorized Collection Point or Collection Center. Separate the packaging material according to responsible waste disposal options and sorting for recycling.
FCC Note: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT.
