User Manual
7
to unlock SIM card and use the handset.
You can turn off the SIM PIN code. Yet in this situation, the SIM card can't prevent
illegal use.
Input PIN code, press OK to end typing. For example, if the PIN code is set to 1234,
then input "1234". After that press Return key.
The SIM card will be locked if you input in wrong code for three times
continuously. The handset will inform you to input in PUK code.
Attention: Your network provider will set a standard PIN code (four to eight
numbers) for your SIM card. It is recommended that you change the code into a
personal code as soon as possible.
2.9. Connection to Network
When the SIM card is successfully unlocked, the handset will automatically search
for available network . The handset will show the information of the network
provider; the status bar will show the signal strength and the network condition
once the handset is successfully connected to a network.
Note: If the lock screens shows "Emergency calls only", it means that you're out of
network coverage (service coverage) or your card is not valid, yet you can still have
emergency calls.
2.10. Charging the Battery
Ensure the battery inserted in the handset. To charge the battery, plug in the charger
connector at the bottom of your phone (USB interface) and then plug the other line
end into an AC power socket.
The battery icon indicates the charging state. While charging, the charge indicators
will scroll.
Disconnect the charger from the phone.
Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will reappear after a few minutes
of charging
.
3. Basic Function
3.1. Make Calls
When the network provider is valid, touch the phone icon appears on the standby
screen, you can call out or answer calls. The indicator on the upper right part shall
show the signal strength.
Quality of connection will be greatly influenced by obstructions. So movement in a
small range may effectively improve the quality of connection.
Make Domestic Calls
Use virtual keyboard to enter phone numbers and then press Dial icon to call. If you
need to change the phone number, please press the delete key on the touch screen to