User Manual

If your phone stops scanning before you make the other device discoverable, touch

Refresh.

Touch the ID of the other device in the list Settings to pair them. If you are

prompted to for a password, enter any password on one device and enter the same

password you entered in the other device to be paired, If the pairing is successful,

your phone connects to the device.

Connect to Internet on your PC via Phone

You can browse the Internet on your PC using your mobile phone. This can be done

in 2 ways:

To access both the options make sure your phone has an active data plan and

mobile data is “ON”.

USB Tethering:

 Connect your mobile phone to your PC via the USB cable.

 Go to Settings> Wireless & Networks>More >Tethering & portable hotspot>

USB tethering.

 Your PC will then read the necessary drivers of your phone and you can then

access internet on your PC.

Note: In case you are unable to connect to internet please get in touch with

customer care executive.

Wi-Fi Hotspot:

 Go to Settings> Wireless & Networks>More >Tethering & portable hotspot>

Turn ON Wi-Fi Hotspot.

 Once the device Wi-Fi Hotspot is active you can see a white icon denoting

wireless network on the notification pane.

Note: You can select the desired security settings for your hotspot network by

following below steps:

 Go to Settings> Wireless & Networks>More >Tethering & portable hotspot>

Set up Wi-Fi hotspot> Security> Select desired security and configure your

password

 Now go to your PC and check for the Hotspot network created by your device.

 Select the network and input the password configured for the hotspot network

on your device.

 You can now browse internet on your PC with the help of data connection on

your phone..

Note: In case you are unable to connect to internet please get in touch with

customer care executive.

Sound & notification

Go to Settings>Device>Sound & notification, you can set Notification, Interruptions

and Sound enhancement in this menu.

Storage

Go to Settings>Device>Storage. Include the SD card storage, available storage,