Users Manual

Adjust the slider of the wireless accessory to the state shown on the left, so that the
two circular holes overlap.
Note that when the wireless accessory is in the state shown on the right, it cannot be
connected correctly.
Accurately insert the hole of the wireless accessory into the Type-C charging jack.
Then, gently push it further until the end pin is reached so that the back of the
accessory fits against the guitar back panel. It is installed on the bottom of the guitar
body.
For charging, please attach the wireless
accessory to the groove on the back of the
charger. Make sure that the accessory can
slide down together with the guitar body in
a direction as given by the arrow until it
comes in full contact with the bottom.
Later, an interface showing charging
status will appear in the screen.
When the battery icon shows full, it
indicates that the charging is complete.
*The detection will be complete within 3-5 seconds after proper
placement, and the screen will display normal charging.

