Assembly Instructions

DC
A
B
© Lavi Industries
All Rights Reserved.
87-065 04-21
QuickMount
®
Required Tools
1. Determine desired location for QuickMount. If
using an Adjustable QuickMount, observe the slots
in your upright rails, slide the hooks on back of
QuickMount accordingly and tighten screws.
See Figure A.
2. Install QuickMount by inserting the back hooks into
the rail slots. See Figure B.
3. Pull belt by holding belt end and pull across aisle
to opposite rack. See Figure C.
4. Wrap belt around upright then slide belt end onto
belt while making sure belt is tight and secure.
See Figure D.
Parts List:
OR
Adjustable QuickMountStandard QuickMount
Goggles
Screw Driver
QuickMount
Standard Back
(HOOKS ARE FIXED)
QuickMount
Adjustable Back
(HOOKS ARE MOVEABLE)
Installation Instructions • Installation Instructions • Installation Instructions