Use and Care Manual

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

4.2.3 Customizing Patrols

Purpose:

Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before

moving on to the next key point. The key points are corresponding to the presets. The presets can be set

following the steps above in Customizing Presets.

Steps:

1. Enter the PTZ Control interface.

Menu>Camera>PTZ>More Settings

2. Select patrol number.

3. Select the under Patrol option box to add key points for the patrol.

Figure 4.6 PTZ- Add Key Point

4. Configure key point parameters, such as the key point No., duration of staying for one key point and

speed of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at

which the PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay

at the corresponding key point. The Speed defines the speed at which the PTZ will move from one key

point to the next.