Use and Care Manual

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

Auto-switch.

Start Recording

Start all-day normal recording or motion detection recording for all channels.

Quick Set

Set the video output mode to Standard, Bright, Gentle or Vivid.

All-day Playback

Play back the video of the selected channel.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main output is disabled.

Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse

operation is disabled; you need to switch back to the Main output with VOIP/MON

button on IR remote control and then press the Enter button.

Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option is included

when right-clicking mouse on this camera.

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:

• Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.

• Multi-screen: Adjust the screen layout by choosing from the dropdown list.

• Previous Screen: Switch to the previous screen.

• Next Screen: Switch to the next screen.

• Quick Set: Set the video output mode to Standard, Bright, Gentle or Vivid.

• Menu Output Mode: Select the menu output mode to HDMI/VGA, Main CVBS or Auto.

• Main Monitor: Switch to the Main Output mode and the operation for the auxiliary output is

disabled.

Note: In the live view mode of the main output monitor, the menu operation is not available while Aux output

mode is enabled.

3.2.4 Main/Aux Output Switching

When the HDMI/VGA output is configured as the main output, you can perform the following operation to

switch to CVBS output as the main output.

Steps:

1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box

pops up:

Figure 3.2 Switch Main and Aux Output

2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to

cancel the operation.

3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output monitor.