Use and Care Manual

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

9.1 Configuring General Settings

Purpose:

Network settings must be properly configured before you operate device over network.

Steps:

1. Enter the Network Settings interface.

Menu > Configuration > Network

2. Select the General tab.

Figure 9.1 General Network Settings

3. In the General Settings interface:

You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS

Server.

If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP

address and other network settings from that server.

Note: The valid value range of MTU is 500 ~ 1500.

4. After having configured the general settings, click the Apply button to save the settings.