Use and Care Manual

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR
115
10.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
Figure 10.4 HDD Information Interface
2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 10.5.
Figure 10.5 Adding NetHDD Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Enter the NetHDD Directory in the text field.
3) Click the OK button to add the configured NAS disk.
Note: Up to 8 NAS disks can be added.