Instructions / Assembly
HD-TVI
Bullet Camera
User Manual
Thank you for purchasing our product. If there
are any ques
ons, or requests, please do not
hesitate to contact the dealer.
This manual may contain several technical
incorrect places or prin
g errors, and the
content is subject to change without
.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory Informa n
FCC Informa n
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable prot
n against harmful
interference when the
equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the ins
n manual, may
cause harmful interference to radio
communica
. Opera n of this equipment in
a residen
l area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
FCC
s
This device complies with part 15 of the FCC
Rules. Opera
on is subject to the following two
c
:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that
may
cause undesired opera
n.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (ba
ery dire ve):
This product contains a ba
ery that
cannot be disposed of as unsorted
municipal waste in the European
Union.
See the product documenta
n for specific
ba
ery informa on. The ba ery is marked with
this symbol, which may include le
ering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the ba
ery to your
supplier or to a designated c
n point. For
more informa
on see: www.recyclethis.info.
This series of camera adopts new genera
on
sensor with high
y and advanced circuit
design technology It features high re
,.
low image distor
o
n and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
High performance CMOS sensor and high
re
n bring high-quality image;
Low illumina
;
OSD menu, parameters are configurable;
Support auto white balance, auto gain control,
electronic shu
er control;
SMART IR mode;
Unit transmission control;
Advanced 3-axis design meets different
installa
on requirements.
1 Intr
n
1.1 Product Features
1.2 Overview
2012/19/EU (WEEE dire ve):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product specifica n for
camera parameters and
.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Dire
ve
2006/95/EC, the EMC Dire
ve 2004/108/EC ,
the RoHS Dire
ve 2011/65/EU.
1.2.1 Overview of Type I Camera
1.2.2 Overview of Type Camera
II
1.2.3 Overview of Type CameraIII
2 Installa n
Bef ore you start:
Please make sure that the device in the package
is in good c
n and all the assembly parts
are included.
Make sure that all the related equipment is
power-off during the installa
on.
Check the specifica
on of the products for the
installa
on environment.
Check whether the power supply is matched
with your power output to avoid damage.
Please make sure the wall is strong enough to
withstand three
s the weight of the camera
and the moun
.
If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
If the product does not n properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
HD Video Cable
Power Cable
Switch Cable
CVBS Cable
Moun g Base
Sun Shield
Lens
IR LED
IR LED
Sun Shield
Adjustable Screw
Moun g Base
Power Cable
HD Video Cable
CVBS Cable
Switch Cable
Lens
Power Cable
Switch Cable
CVBS Cable
HD Video Cable
Sun Shield
Adjustable Screw
IR LED
Steps:
1.Drill the screw holes and the cable hole in the
ceiling according to the supplied drill template.
2.Hammer the supplied plas
c expansion bolt into
the screw holes.
2.1 Ceiling Moun g for Type I
Camera
Figure 2-1 Drill Template
All the diagrams only apply to cameras with
a 1080p re
. The cameras with a 720p
resol
on of these three types do not have
CVBS cables and switch cables.
.
All Screw Holes: for
moun
g base
o d o
e
g
o
The switch cables are designed for toggling
status of the WDR ons for 1080p cameras.
The WDR
on is disabled by default, and
you can short the white and black line-ends of
the switch cable to enable the f
on.
o