Use and Care Manual

www.LaViewUSA.com 11
Conguring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ.
The conguring of the PTZ parameters must be
done before you can control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
PTZ- General
2. Choose the camera in the Camera
dropdown list.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be in the PTZ
camera parameters section of the camera manual.
Example: If the PTZ camera uses the
protocol of DRAGON, you should select
DRAGON in the PTZ Protocol eld.
4. Click Apply button to save the settings.
Setting PTZ Presets,
Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and
patterns are be supported by PTZ protocols.
Customizing Presets
Purpose:
Follow the steps to set the Preset location, which is
where you want the PTZ camera to point when an
event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
PTZ- More Settings
2. Use the directional button to wheel the
camera to the location that you want to as preset.
3. Click the round icon next to Save
Preset.
4. Click the preset number to save the
preset.
Repeat the steps2-4 to save more presets. If the
number of the presets you want to save is more
than 17, you can click […] and choose the available
numbers.
More Presets
Calling Presets
Purpose:
This feature enables the camera to point to a
specied position such as a window when a preset
is needed.
Call preset in the PTZ setting interface:
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Check the round icon of Call Preset.