Use and Care Manual
www.LaViewUSA.com34
Export Log Files
7. Select the backup device from the
dropdown list under Device Name.
8. Click Export to export the log les to the
selected backup device.
You can click the New Folder button to
create a new folder in the backup device,
or click the Format button to format the
backup device before log export.
Notes:
1) Please connect the backup device to NVR
before initiating log export.
2) The log les exported to the backup device
are named according to exporting time, e.g.,
20110514124841logBack.txt.
To export all the log les:
You can enter the Log Export interface.
Menu> Maintenance> Log Information> Log
Export
Log Export Interface
Check the checkbox next to the HDD, and
click the Export button to export all the
log les stored in the HDD.
Upgrading System
Purpose:
The rmware on your NVR can be upgraded by
local backup device or remote FTP server.
Upgrading by Local Backup
Device
Steps:
1. Connect your NVR with a local backup
device where the update rmware le is
located.
2. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
3. Click the Local Upgrade tab to enter the
local upgrade menu, as shown in Figure
12. 13.
Local Upgrade Menu
4. Select the update rmware le from the
backup device.
5. Click the Upgrade button to start
upgrade.
6. After the upgrading is complete, reboot
the NVR to activate the new rmware.
Restoring Default Settings
Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
Restore Factory Default
2. Click the OK button to restore the default
settings.
Note: Besides network parameters (IP address,
subnet mask, gateway, MTU, default route and
server port), all other parameters of the device
will be restored to factory default sengs.