Use and Care Manual

www.LaViewUSA.com 9
Introduction of Live View
Live view shows you the video captured by each
camera in real time. The NVR automatically enters
Live View mode when powered on.
Live View Icons
In the live view mode, there are icons at the top right
of the screen, showing the status of each channel, so
that you can see whether the channel is recording, or
whether there are alarms are being triggered.
Operations in Live View
Mode
In live view mode, there are many functions
provided. The functions are listed below.
• Single Screen: Showing only one screen on
the monitor.
• Multi-screen: Showing multiple screens on
the monitor simultaneously.
• Auto-switch: The screen is auto switched
to the next one. You must set the dwell time
for each screen on the conguration menu
before enabling auto-switch.
Menu>Conguration>Live View>General.
• Start Recording: Normal record and motion
detection record are supported.
• Output Mode: Select the output mode to
Standard, Bright, Gentle or Vivid.
• All-day Playback: Playback the recorded
videos for the selected day.
Using the Mouse in Live
View
Mouse Operation in Live View
Note: The dwell time of the live view conguration
must be set before using Start Auto-switch.
Note: Reboot Intelligence is enabled when right-
clicking on a camera as long as, the corresponding
camera supports intelligent function
Right-click Menu
Note:
Two ways to show the Right-click Menu
Bar: right-clicking or moving the mouse to
the bottom of the screen.
You can click
on the right side of the
menu bar to clip the menu on the screen.
Quick Setting Toolbar in
Live View Mode
On the screen of each channel, there is a quick
setting toolbar which shows up when you single
click the mouse in the one of the camera views.
Note:
Live View Strategy is only available for
network cameras.
Quick Setting Toolbar
Description of Quick Setting Toolbar Icons
Instant Playback only shows the last ve
minutes. If no recording is found, it means there
was no recording during the last ve minutes.
Digital Zoom can zoom in on a selected area
Left-click and draw to select the area to zoom in.
Digital Zoom