Use And Care Manual

User Manual of LV-N9808C8E Series NVR
32
Figure 2. 17 Protocol Setting
2. Choose the protocols you just added to validate the connection of the network camera.
2.3.3 Editing IP cameras connected to the PoE interfaces
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to
the connected network cameras.
The LV-N9808C4E series NVR provides 4 PoE interfaces which can connect to 4 network cameras directly; and if
you disable the PoE interface, you can also connect to the online network cameras. And the PoE interface supports
the Plug-and-Play function.
Example:
As for LV-N9808C4E NVR, when you want to connect 1 online camera and connect 3 network cameras via PoE
interfaces, you must disable 1 PoE interface in the Edit IP camera panel.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.