Use And Care Manual

User Manual of LV-N9808C8E Series NVR
128
Figure 9. 11 Access Device via NVMS7000
• LTS:
Enter the Server Address and Device Domain Name for LTS.
1) Enter the Server Address of the LTS server, which is ns1.dvrlist.com by default.
2) Enter the Device Domain Name. You can use the alias you registered in the LTS server or define
a new device domain name. If a new alias of the device domain name is defined in the NVR, it
will replace the old one registered on the server. You can register the alias of the device domain
name in the LTS server first and then enter the alias to the Device Domain Name in the NVR; you
can also enter the domain name directly on the NVR to create a new one.
Figure 9. 12 LTS Settings Interface
5. Click Apply button to save and exit the interface.
9.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 9. 13.