Manualshelf

Use And Care Manual

ManualsBrandsLaView ManualsAlarms & Security Systems8 Channel 6 Camera 1080p 2TB Wired Security Camera Kit
31323334353637383940
User Manual of LV-N9808C8E Series NVR
31
2.3.2 Editing the Connected IP cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 2. 16 Edit the Parameters
2. Click apply to save the settings and click OK to exit the editing interface.
Explanation of the icons
Get the latest status of the IP cameras.
Delete all the IP cameras.
Add all the detected IP cameras.
Configuring the customized protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can configure the
customized protocols for them.
Steps:
1. Choose the protocol type of transmission and choose the transfer protocols.
Note: The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to
Figure 2. 17.