Use and Care Manual

www.LaViewUSA.com 31
Conguring OSD Settings
Purpose:
You can congure the OSD (On-Screen Display)
settings for the camera, including date /time, camera
name, etc.
Steps:
1. Enter the OSD Conguration interface.
Menu > Camera > OSD
2. Select the camera to congure OSD
settings.
3. Edit the Camera Name in the text eld.
4. Congure the Display Name, Display
Date and Display Week by clicking the
checkbox.
5. Select the Date Format, Time Format and
Display Mode.

6. You can use the mouse to click and drag
the text frame on the preview window to
adjust the OSD position.
7. Click the Apply button to apply settings.
Conguring Privacy Mask
Purpose:
You can congure up to four privacy mask zones
which will prevent certain areas from being viewed
or recorded.
Steps:
1. Enter the Privacy Mask Settings interface.
Menu > Camera >Privacy Mask
2. Select the camera to set a privacy mask
on.
3. Check the checkbox next to Enable
Privacy Mask to enable this feature.
Privacy Mask Settings Interface
4. Use the mouse to crop a zone on the
window. Different zones will be marked
with different frame colors.
Note: Up to 4 privacy masks zones can be
congured and the size of each area can be
adjusted.
5. The designated privacy mask zones on
the window can be deleted by clicking
the corresponding Clear Zone1-4 buttons
on the right side of the window, or you
canclick Clear All to clear all zones.
Set Privacy Mask Area
6. Click the Apply button to save settings.
Conguring Video
Parameters
Steps:
1. Enter the Image Settings interface.
Menu > Camera >Image
Image Settings Interface
2. Select the camera to set image parameters
for.
3. Click the arrows to adjust each parameter.
Click the Apply button to save settings.