Installation Guide

QUICK START GUIDE
www.laviewsecurity.com
1 Connect your cameras
Connect the Cat5e cable into the camera
Connect the other end of the Cat5e cable into
the NVR PoE port.
(Repeat for all cameras)
•
•
2 Connect to your monitor/TV
Connect your NVR and TV/monitor with a HDMI or
VGA cable (Not included)
Note: Your monitor/TV must support the output resolution of the
NVR or you may get a black screen or a possible error message. You
cannot use a laptop as a display.
•
3 Connect the mouse and power
Connect the mouse to the USB port
Connect the NVR power cable to the NVR
•
•
4 Connect to your network (OPTIONAL)
Connect the LAN port on the NVR to the LAN port
on your router via an Ethernet cable for remote
viewing on your mobile phone, tablets, PC and Mac
Note: The NVR will still work as a standalone video recorder if you do
not have internet connection and skip this step.
•
•
You can also add existing IP cameras to your NVR from
your network.
The connection is now completed. Turn on the
power switch and follow the start-up wizard on
your screen to configure the NVR. (Next Page)
5 Configure the start up wizard
•
We recommend testing all the cameras and cables prior to installation.
3
4
2
1
1
2
3
4
VIDEO IN
AUDIO
OUT
LAN
12V
IN
USB
HDMI
VGA
Mouse
HDTV
PC Monitor
Wireless Router
Not Included
12VDC Required if PoE not available
*
Power Cable
1920x1080
OPTIONAL
OR
HDMI
VGA
USB
LAN
1080p
AUDIO
OUT
LAN
IN
USB
HDMI
VGA