Use and Care Manual
www.LaViewUSA.com 15
Descriptions of the scheduled recording icons are
shown in the gure below.
Descriptions of the scheduled recording icons
Click the Apply button to validate the settings.
If you wish to use these settings for other channels,
click Copy, then choose the channel to which you
want to copy the settings.
Copy Schedule to Other Channels
Conguring Motion
Detection Record
Purpose:
Follow these steps to set the motion detection
parameters. In live view mode, when a motion
detection event takes place, the NVR can analyze
it and carry out a variety of actions to handle it.
Enabling motion detection function can trigger
certain channels to start recording, full screen
monitoring, audio warning, notify the surveillance
center etc.
Steps:
Enter the Motion Detection interface.
Menu>Camera>Motion
Motion Detection
Congure Motion Detection：
Choose camera you want to congure.
Check the checkbox next to Enable Motion
Detection.
Crop the area for motion detection by mouse. If you
want to set motion detection for the area shot by the
camera, click Full Screen. To start over,
click Clear.
Motion Detection- Grid
Click Setting to select channels that will link to the
motion detection trigger.
Motion Detection Settings