R COAT RACK page#1
Table of contents.....................................................................................................................................2 General Information.................................................................................................................................3 Use and Storage of the Handbook.........................................................................................................3 Intended use............................................................
Thank you for purchasing our Lavish Home Collection product, we have designed our furniture with you, the customer in mind. Our clear and easy step by step instructions will guide you through the project from start to finish. This user manual contains important and useful information to accompany your purchase. Failure to follow the instructions outlined may result in personal injury or damage to the product.
PART LIST PART A PART B PART C PART D Steel leg 2pcs First board 1pc Top board 2pcs bottom net rack 2pcs PART E PART F PART G PART H top connected tube 1pc support tube 2pcs support tube 2pcs support tube 2pcs PART I hook-9pcs HARDWARE M7 x 60 Allen screw-8pcs M6 x 55 Allen screw-12pcs #7 #6 #4 #3 #2 #1 M6 x 25 Allen screw-2pcs #5 M6 x 12 Allen screw-8pcs M5 x 35 self-tapping screw-2pcs #8 M8 x 30 setscrew-2pcs Strap-2pcs Tools needed: Allen Allen key-1pc (Included) Rema
Assembly instructions Attention: In order to help with assembly, do not tighten the screws until you have assembled all the other parts STEP 1 #2x12 #8x1 a) Connect Middle Shelf D to Part A, using hardware #2 & #8 b) Connect F to Part A, using hardware #2 & #8 c) Connect Bottom D Shelf to Part A, using hardware #2 & #8 #2 #2 #2 #8 #2 STEP 2 #3x2 #8x1 Assemble part G with hardware #3,#8 #3 #3 #3 #8 page#5
STEP 3 #4x2 #8x1 Assemble part H with hardware #4,#8 #4 #4 #4 #8 #4 #8 STEP 4 #4x2 #8x1 Assemble part E with hardware #4,#8 #4 #4 page#6
STEP 5 #4x4 #8x1 Assemble part B with hardware #4,#8 #4 #4 #4 4 #8 STEP 6 #1x8 #9x1 Assemble part C with hardware #1,#8 #1 #1 #1 #8 page#7
STEP 7 PART I Assemble PART I on the board directly I I I STEP 8 #8x1 Using the Allen key tighten all screws.
STEP 9 #5x2 #6x2 #7x2 To prevent tipping.
Final Step STEP 10 max 44 LBS 4 LBS 11 LBS page#10
Cleaning, Care and Maintenance Regularly check all fastenings to ensure that they are properly tightened. Clean with a wet soft cloth, then use a soft lint free cloth to dry. Do not clean furniture with harsh cleaners or polish. Do not place furniture in direct sunlight or near heating/cooling vents. For indoor residential use, do not place furniture outside. Children should not climb on furniture.
