R COAT RACK page#1
Table of contents.....................................................................................................................................2 General Information.................................................................................................................................3 Use and Storage of the Handbook.........................................................................................................3 Intended use............................................................
Thank you for purchasing our Lavish Home Collection product, we have designed our furniture with you, the customer in mind. Our clear and easy step by step instructions will guide you through the project from start to finish. This user manual contains important and useful information to accompany your purchase. Failure to follow the instructions outlined may result in personal injury or damage to the product.
PART LIST PART A Steel leg 2pcs PART B PART C PART D PART E bottom net rack 2pcs support tube 2pcs top connected tube 1pc top connected tube 1pc PART H PART F PART G contacted hook rack 1pc contacted hook rack 1pc PART I support tube 1pc PART J support tube 1pc Top board HARDWARE M6 x 38 Allen screw-10pcs M6 x 30 Allen screw-4pcs #5 #4 #3 #2 #1 M6 x 30 Allen screw-6pcs M5 x 50 self-tapping screw-2pcs M8 x 30 setscrew -2pcs #6 Allen key-1pc Tools needed: Allen (Included) Re
Assembly instructions Attention: In order to help with assembly, do not tighten the screws until you have assembled all the other parts STEP 1 #1x10 #6x1 d) Connect Middle Shelf B to Part A, using hardware #1 & #6 e) Connect H to Part, using hardware #1 & #6 f) Connect Bottom B Shelf to Part A, using hardware #1 & #6 #1 #1 #6 #1 STEP 2 #3x2 #6x1 Assemble part C with hardware #3,#6 #3 #3 #3 #6 page#5
STEP 3 #3x2 #6x1 Assemble part D,E with hardware #3,#6 #3 #3 #3 #6 STEP 4 Assemble part F,G on the tube directly page#6
STEP 5 #3x2 #6x1 Assemble part I with hardware #3,#6 #3 #3 #3 #6 STEP 6 #2x4 #6x1 Assemble part J with hardware #2,#6 #2 #2 #2 #6 #2 page#7
STEP 7 #6x1 Using the Allen key tighten all screws. #6 #6 STEP 8 #4x2 #5x2 To prevent tipping. Secure coat rack to a wall using #4.
Final Step STEP 9 max 44 LBS page#9
Cleaning, Care and Maintenance Regularly check all fastenings to ensure that they are properly tightened. Clean with a wet soft cloth, then use a soft lint free cloth to dry. Do not clean furniture with harsh cleaners or polish. Do not place furniture in direct sunlight or near heating/cooling vents. For indoor residential use, do not place furniture outside. Children should not climb on furniture.
