Instructions / Assembly

LED Architect Task Lamp with Clamp
Introducing a high quality & high color rendering index LED task lamp
with eye-care technology that provides natural light that is clearer and
brighter with a large illumination range over your home or office
desk, workbench or crafting table supported with adjustable lamp arms.
1. Unpack and place the lamp in a flat, clean surface.
2. Insert the swing arm into the lamp clamp hole. See ILLUSTRATION A.
3. Tighten the fastening screw. See ILLUSTRATION B.
4. Put the AC/DC adapter's plug into the connecting socket.
Put this AC/DC adapter into the power socket.
5. Adjust the swing arms and light ring to desired height and angle. See ILLUSTRATION C.
6. Use the Allen wrench (included) to tighten each swing arm joint. See ILLUSTRATION D.
7. The stepless dimming switch is located on top of the light ring. See ILLUSTRATION E.
Tap this switch to turn on or turn off the lamp.
Keep tapping this switch to adjust the brightness.
The stepless dimming switch has a memory function.
--- It remembers the brightness level from the last time after you turned off the light.
LED Architect Task Lamp: Max. LED Wattage: 7W
Max. Lumen: 440 Lm. CRI>95; 4000K mode
The LED lighting on the ring is NOT replaceable. Lifespan: 50,000 hours.
Only uses 20% energy consumption vs. incandescent bulb.
Adjusts up to 2.5" table thickness