Installation Guide

ManualsBrandsLaviva ManualsPlumbingVitri Collection 313VTR-72CCW 72" Single Sink Cabinet in Cloud White Color

VITRI INSTALLATION GUIDE

313VTR

For questions on installation, please call our friendly customer service team at :

818-849-3041 or email support@lavivaforlife.com

PLEASE SHARE YOUR PHOTOS WITH US!

@lavivaforlife #lavivaforlife

ATTENTION :

Vanity must be installed by professional contractor with proper tools.

Anchors are NOTprovided. Must use the appropriate anchors for speciﬁed wall.

Wall plates must be mounted directly to studs for proper support and safety.

If that is not possible, wall anchors are required.

Summary of content (7 pages)

PAGE 1
VITRI INSTALLATION GUIDE 313VTR ATTENTION : Vanity must be installed by professional contractor with proper tools. Wall plates must be mounted directly to studs for proper support and safety. If that is not possible, wall anchors are required. Anchors are NOTprovided. Must use the appropriate anchors for specified wall. For questions on installation, please call our friendly customer service team at : 818-849-3041 or email support@lavivaforlife.
PAGE 2
1 3 1 1 2 1 T 20 2 2 2 It is recommended to add supporting 2”x6” blocking in between the wall studs for extra support. 3 Blocking Floor 2 Carefully unbox product(s) from packaging and remove drawers from the base of cabinet as shown below: Using both hands, click on rail tabs (underneath drawer) and pull out and up simultaneously. www.lavivaforlife.
PAGE 3
Determine your finished height of the cabinet. Fix the template to the wall making sure it is leveled and mark the screw holes with a pencil. Position and secure the supporting wall plates to wall studs. 48 120 8 12 48 9 58 120 44 9 12 1.5 8 3 (NOTE: Don’t forget to consider the thickness of your countertop) 4 Tighten bottom screw of brackets (inside cabinet on both sides) to extend the hook past the frame of the cabinet in order to lock into bracket. 19 mm 22 mm www.lavivaforlife.
PAGE 4
5 Hang cabinet and secure brackets into wall plates. Make sure to hear the brackets click into place. 6 Adjust brackets to level the cabinets. 19 mm 22 mm www.lavivaforlife.
PAGE 5
7 IF YOUR CABINET ONLY HAS 1 BASE, SKIP TO STEP 9 Attach spacers (313VTR-SR) between the cabinets with the screws provided. Use predrilled holes in cabinet to screw in the spacers. One spacer has a finished (leather grey) front, which must be used as the front spacer, flush with the cabinet's front and top. 8 Copy steps 1-4 for each additional cabinet. Make sure to give the proper spacing between the spacer and the wall plate to consider the thickness of the cabinets frame.
PAGE 6
10 Insert the drawer inside the cabinet placing it on the slides. Push it all the way back until you hear it click into place. 11 Connect the drawer front into the drawer box. 12 3 3 1 1 2 Adjust 2 1 1 4 ±2 the doors per instructions below: 1- Adjusts the door up and down. 2- Adjusts door left and right. 3- Adjusts the tilt of the door. 4- Removes the door off drawer box. 2 2 2 2 2 T 20 T 20 ± 1.5 3 3 See following page for adjustment guide. www.lavivaforlife.
PAGE 7
LEGRABOX adjustments 3 2 1 Removal Installation 3 2 1 1 3 Cover cap removal/installation 2 2 T 20 1 1 2 1 T 20 2 2 3 2 1 3 1 2 2 1 3 T 20 3 2 2 1 Height, side and tilt adjustments 1 2 1 T 20 2 Height adjustment ± 2 (3/32") 2 Side adjustment ± 1.5 (1/16") 3 Tilt adjustment M height + 1.5 /-0.5 (1/16"/1/32") C/F height ± 1.5 (1/16") T 20 2 Height adjustment Turn the adjustment screw clockwise 2 to raise or lower the drawer front.