06-5900 Rev: C MSDS - OIL, SAE30 Release/Change Authorization Number: Issue Date : Created By : Material Safety Data Sheet Supersedes: Superseded by: Scale : 5053821 8/20/2009 M.ZENNER None THIS UNPUBLISHED DOCUMENT CONTAINS TORO CONFIDENTIAL AND PROPRIETARY INFORMATION. IT MAY NOT BE WHOLLY OR PARTIALLY COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISSION FROM TORO. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: “© TORO ALL RIGHTS RESERVED”.
Material Safety Data Sheet The Toro Company 8111 Lyndale Ave S Bloomington, MN 55420 Revision Date: 5/26/2009 Issue Date: 8/8/2009 Product Identification Product Name: Toro 4 Cycle Oil (SAE 30 Summer Weight) Parts Number: Product type: MSDS # Emergency Contact: Contact Number: Oil 625702417 Chemtrec : 1-800-424-9300 505-156, 38910, 77-4920 1-952-888-8801 Chemical Components Chemical CAS # % Highly-refined petroleum lubricant oils Proprietary Ingredients Zinc and zinc compounds Calcium phentate
Health Hazards Major Routes of Exposure: Inhalation Skin X Ingestion Ingredients Considered Hazardous to Health Potential Health Effects: This product is not known to contain any components at concentrations above 0.1% which are considered carcinogenic by OSHA, IARC or NTP. Chemical Stability: Stable Signs and Symptoms of Acute Exposure Inhalation At elevated temperatures or in enclosed spaces, product mist or vapors may irritate the mucous membranes of the nose, the throat, bronchi, and lungs.
clothing before reuse. Clean or discard contaminated leather goods. If material is injected under the skin, seek medical attention immediately. Ingestion: Do not induce vomiting unless directed to by a physician. Do not give anything to drink unless directed to by a physician. Never give anything by mouth to a person who is not fully conscious. Seek medical attention immediately. Notes to Physician: INGESTION: The viscosity range of the product(s) represented by this MSDS is greater than 100 SUS at 100°F.
Handling and Storage Accidental Release /Spill Measures to Take Do not touch damaged containers or spilled material unless wearing appropriate protective equipment. Slipping hazard; do not walk through spilled material. Stop leak if you can do so without risk. For small spills, absorb or cover with dry earth, sand, or other inert non-combustible absorbent material and place into waste containers for later disposal. Contain large spills to maximize product recovery or disposal.
is a "hazardous waste" at the time of disposal. Transportation, treatment, storage, and disposal of waste material must be conducted in accordance with RCRA regulations (see 40 CFR 260 through 40 CFR 271). State and/or local regulations may be more restrictive. Contact your regional US EPA office for guidance concerning case specific disposal issues. Empty drums and pails retain residue.
Ecological Information Ecotoxicity: Analysis for ecological effects has not been conducted on this product. However, if spilled, this product and any contaminated soil or water may be harmful to human, animal, and aquatic life. Also, the coating action associated with petroleum and petroleum products can be harmful or fatal to aquatic life and waterfowl Environmental Fate: An environmental fate analysis is not available for this specific product.
Evaluation Warning : The document was created with Spire.PDF for .NET. B.B. BATTERY CO., LTD. MATERIAL SAFETY DATA SHEET SECTION 1: PRODUCT AND MANUFACTACTURER Product name: Valve regulated lead-acid batteries Manufacturer: B.B. Battery Co., Ltd. Address: Chengdong Trial Area, Huanggang, Raoping, Guangdong, P.R.China 515700 Tel: +86-768-7601001 or +86-768-7601002 Fax: +86-768-7601469 US Office: B&B Battery USA, Inc.
SECTION 4: PROTECTION EXPOSURE PROTECTION SKIN Rubber RESPIRATORY COMMENTS gloves, Apron, Safety Protective equipment must be worn if battery is cracked shoes or otherwise damaged. Respirator (for lead) A respirator should be worn during reclaim operations if the TLV exceeded. EYES Safety goggles, Face Shield SECTION 5: FLAMMABILITY DATA COMPONENTS FLASHPOINT EXPLOSIVE LIMITS Lead None None Sulfuric Acid None None Hydrogen 259℃ 4% - 74.
SECTION 7: CONTROL MEASURES 1. Store lead/acid batteries with adequate ventilation. Room ventilation is required for batteries utilized for standby power generation. Never recharge batteries in an unventilated, enclosed space. 2. Do not remove vent caps. Follow shipping and handling instructions that are applicable to the battery type. To avoid damage to terminals and seals, do not double-stack industrial batteries.
SECTION 9: SULFURIC ACID PRECAUTIONS INHALATION: Acid mist form formation process may cause respiratory irritation, remove from exposure and apply oxygen if breathing is difficult. SKIN CONTACT: Acid may cause irritation, burns or ulceration. Flush with plenty of soap and water, remove contaminated clothing, and see physician if contact area is large or if blisters form. EYE CONTACT: Acid may cause severe irritation, burns, cornea damage and blindness.
