Replacement Part List

BATTERY PACK AND CHARGER

ASSEMBLY

NOTE: Always place blade scabbard over blade when hedge trimmer is not in use or user is

performing any maintenance.

Release/Attach

● Press the release button

on the battery pack and

remove battery from

product (Fig. 2).

● Align the battery pack to

the slots at the bottom

side of the rear safety

guard and slide it in until

it locks in place (Fig. 3).

Fig. 2 Fig. 3

Battery Pack

Hedge Trimmer

Slide Battery Into Tool

CONNECT BATTERY PACK

● Make sure the on/off switch is in its off position.

● Attach the battery pack to the product. Ensure it snaps in place.

● Your product is now ready to be used.

Attach/ Release ( See Figure 4.)

● Align the battery pack to the slots on the charger

and slide it in until it locks in place

● Connect the charger to the power supply.

● Allow sufficient charging time (3-5 hours), and then

disconnect the charger from the power supply.

● Press the release button on the battery pack and

remove battery from charger.

WARNING:

It is normal for the battery pack and

charger to become warm (but not hot) during charging

process. If the battery does not charge properly,

check to make sure the electrical outlet is "live".

WARNING: Always charge the battery before

storage! To reduce risk of fire, never leave the battery

connected with the charger for more than 24 hours!

Fig. 4