Replacement Part List

OPERATION

BATTERY PACK AND CHARGER

Pommel Handle Safety Switch

Power Switch

Fig. 5

Starting And Stopping

● Make sure the on/off switch is in its off position.

● Attach the battery pack to the product. Ensure it snaps in place.

● Your product is now ready to be used.

Intended Use

This hedge trimmer CLHT2422 is with rated battery voltage of 24V. This hedge trimmer is charged

with a charger which output is 24V.

The product is intended for trimming hedges, bushes and shrubs. Observe the technical data for the

maximum cutting capacity. Do not cut branches exceeding the stated maximum capacity. This

product is intended for private domestic use only, not for any commercial trade use. It must not be

used for any purposes other than those described.

Starting With Two Handed On/Off Switch

● Hold the hedge trimmer with the right

hand at the rear handle and with the

left hand, squeeze the safety switch

found at the front handle.

● Slowly squeeze the on/off switch to

power on trimmer (Fig. 5).

● To turn hedge trimmer off simply

releace either of the switched and

power to unit will stop.

● The battery’s charge level can be checked either when the battery is attached on the machine or

removed from the machine.

LEDs on battery

(Continuous lighting)

4 LEDs (inc 2 green)

3 LEDs (inc 1 green)

2 LEDs (orange & green)

1 LEDs (red only)

Battery Capacity

Fully charged

indicator lights

buttongreen

orange

red

> 50%

> 25%

< 25%

Recharge required