Replacement Part List

16
OPERATION
Trimming (See figs. 6-7)
● Cut and remove branches exceeding the cutting capacity of this product using a proper pruner
before operation.
● Move the cutting device lightly through the cutting surface in a sweeping motion following the
shape of the hedge or shrub.
● A slight tilt downwards of the cutting device in the direction of motion is recommended for
optimum cutting performance.
● Do not to rush and do not attempt to cut too much with one stroke of the cutting device.
● First cut both sides from the bottom cutting upwards to the top.
● This will prevent any of the trimmings falling into the path of the area still to be cut (Fig. 6).
● After cutting the sides proceed to the top (Fig. 7).
Fig. 6
Fig. 7
Fig. 8
Hang Hole
● To store hedge trimmer, remove battery pack
from unit and use the convenient protective tip
to hang your hedge trimmer out of the way
until next use (Fig. 8).