User Manual

6.7.If the headset has paired with your phone but disconnected, it will connect the
paired phone automatically when you turn on the headset again within operation range.
7.Answering a call
When a call is coming, you can press MFB to answer the call.
8.Ending a call
You can press MFB to end the call you are answering.
9. Rejecting a call
Press and hold MFB for 2 seconds to reject the call.
10.Voice Dialing
In STANDBY MODE, press MFB for 2 seconds and say the voice tag as soon as you
hear the short beep (Ensure your phone supports voice dialing function, and you have
recorded the voice tag into your phone. See the user guide of your phone for
instructions.)
11.Last Number Redial
Press MFB twice.
12.Adjusting Volume
Press volume botton “+” or “-“ shortly to adjust the volume.
13.Power Saving
The headset will turn off automatically if it can not be paired or connected with any
devices within 20 minutes.
14.Pairing With Two Bluetooth Mobile Phones
14.1.Pair your headset with the mobile phone A as normal(See “Pairing Your Headset
with a Bluetooth Mobile Phone”).
14.2. Turn off the Bluetooth function in Phone A or power off, the headset will be in
STANDBY MODE.
14.3.Repeat the pairing operation on the pair with the mobile phone B.Turn off the
headset again after successful pairing. Then turn on the headset, and open the mobile
phone A bluetooth function or turn on the mobile phone, it will connect the two mobile
phones simultaneously.
14.4.When the headset connect with the mobile phone A answering the call, it is
connected with mobile phone B simultaneously.
Note: The above operations may vary due to different BT mobiles’ compatibility.
15..Disconnecting
To disconnect the paired headset from your phone, please turn off the headset or
disconnect the headset from the Bluetooth menu of your phone .
16.Maintenance