OPERATION INSTRUCTION IP Video Door Phone User Manual MC-1054(A-3)
LIMITATION OF LIABILITY ※ The doorbell/camera units should be fitted with an approved weather shield if the chosen position is in direct sunlight, or in contact with rain, snow or irrigation sprinkler systems. ※ This users' manual is supplied 'as is', with no warranties, be it expressed or implied, including, but not limited to, the implied warranties of merchantability, suitability for any exact purpose, or non-infringement of any third party's rights.
Table Tableof ofContents Contents LIMITATION OF LIABILITY..............................................................................1 DISCLAIMER OF WARRANTY.........................................................................1 SAFETY INSTRUCTIONS...............................................................................1 CARING FOR THE ENVIRONMENT BY RECYCLING........................................2 COPYRIGHT STATEMENT..............................................................................
1.3 Fitting of the IP Outdoor Camera 1. Description Of IP Outdoor camera 1.1 Feature(Please take actual model as quasi ) s Antenna(optional) User Manual Outdoor antenna 3 pcs Installation CD(with full manual and android mobile phone software) 1 pcs User quick guide 1 pcs External Switching Power Adapter 1 pcs Indoor antenna (optional) (optional) 8 Affixation screws or or Antenna (optional) 7 Indoor antenna(optional) Outdoor antenna(optional) 1pcs(6dBi or 3dBi) 1pcs(10dBi) 1.
2. Device Connect--Through wired network or wireless network(optional) 1.5 Installation process of Outdoor Units A. User can connect the outdoor camera through network cable, operation steps: 1. Connect the network cable to the outdoor camera according to section 1.4 wiring diagram of the IP outdoor camera . 2. Connect the power adapter to the electrical outlet of the outdoor camera and power on. 3. Wait for a while until hearing a beep, this time the outdoor camera starts completely.
program is located on the included CD or downloaded via “Play Store”, and the iPhone or iPad program should be downloaded via “APP Store”. In “Play Store” or “APP Store”, please search for “MobileEyeDoor+” and install it onto user’s mobile or Pad. Please see the instruction manual for user’s mobile to install the program.
Name: Set name for the outdoor camera, and saves settings for future usage. UID: The device UID (UID is attached to the machine). User: The user name set for entering the IP outdoor device system. The default is “Admin”. Password: The password set for entering the outdoor device system. The default is “888888". Channel Number: Set the max channels of the device will be connected. Click “ ” to save. 2> After adding the device successfully, the device will appear on the main screen.
device and the mobile phone are both connected to internet. Note: 1) The alarm push function can be effective, and the device must be added by UID type. 2) For the phone with iOS system, please go into “Settings->Notification Center” on you phone, click on “MobileEyeDoor+” and make sure you have “Badge APP Icon, Sounds, Shown in Notification Center” enabled. Also make sure you have “Shown on Lock Screen” enabled.
A. Adding by “Scan QR code” Click “ ” to the next interface, users can scan two-dimensional code attached to the machine through the mobile phone, and the device UID will be shown. B. Adding by “Manually enter” Click “ ” to the next interface, users can add a new device by UID type or by IP type. a. By IP type After entering the “IP” Settings menu, the following fields will need to be completed: Name: Set name for the outdoor device, and saves settings for future usage.
4) The functions of the other icons on the live view: Unlock. Snapshot: to capture a frame of the video stream as a still photo. Record: Click it to start manual record video on the current channel, and the right top corner of the channel has a normal recording video symbol “[REC]”. And click it again to stop manual record. Click it to turn the sound on or disable. Click it to start to talk, and the background of the button will be highlighted. Click it again to stop talking.
5.3 Connection Settings 5.1 Running Environment Install the software through the Internet browser of OS to conveniently operate the network from a remote location. This device supports C/S, B/S, and access in LAN and WAN. It also supports IP and domain name visiting.
5.4 Quick Setting 1)Through the IP outdoor camera connection to network (or PC), and then to the outdoor device electric start. Note: if the IP outdoor camera and PC connected directly, PC’s IP address to use manual distribution methods, and the IP address of the PC network segment and the outdoor device keep the same network segment. 2)Copy the quick setting guide program “HiCamSearcher_v1.1.exe” from the installation CD to user’s PC, and run it on PC. 2. 2.
Click “ Download Player ” and download the file “IPDoor.zip” to the PC. Open the zip file to run the file “IPDoor.exe” and it will install outdoor device’s OCX on the PC (according to the method as following figures). 6)Click “OK” to confirm device parameters configuration. 5.5 System Login 1)Open the web browser, enter the IP address of the device(such as “http://xxx.xxx.xxx.xxx”) , which can be searched by the program “HiCamSearcher_v1.1.exe”.
Note: Different router has different settings for port forwarding; please kindly follow your router guide to do the port-forwarding. After the port-forwarding is done, you could view the IP outdoor camera from WAN now. 4)After login, it will enter into “Home” interface of the live view as follows. IPDoor 2014-04-25 11:20:08 5.7 Function Settings 5.6 Port Forwarding If visit IP outdoor camera via Internet Explorer browser from WAN, you must do port forwarding on the router.
Stream: Set up network stream, including main flow and minor flow. Image: Set up the size of view image. Options include Fit size and Src size. 5.7.2 Media Click “Media” to enter the media parameter setting menu. This interface includes settings for Video and OSD. 5.7.2.1 Media--Video Click “Media—Video” to access the interface as follows. And user can set up parameters of main stream, sub stream and mobile stream. A.
5.7.3.2 Network--DDNS 5.7.3.1 Network--Basic Settings Click “Parameters—Network—Basic Settings” to enter the LAN Settings interface. Default IP type is “dynamic IP Address”. The user can set up device network parameters through the operation “Quick Setting Guide”, user can change it according to your network environment. A. LAN Settings [IP Type]: There are two options: “Fixed IP Address” and “dynamic IP Address”.
If not, user must set up parameters about Wifi again. 4. When the equipment connected to the Internet, and also enable the WIFI, when activated, the equipment will be the first to choose Ethernet cable connection mode, if can't connect, then choose WIFI connection. WIFI connection of the ports to use are consistent with cable connection of the ports to use. 5.7.4 System Click “System” to enter the parameters setting menu.
3) Upgrade: Click “ ” to select the firmware file for upgrading, for example, the firmware file such as “hi3518-96223-V1003-20140421.ov” is on the desktop. First choose the firmware file, click “ ”, and it will be shown as “ ”,then click “ ” to upgrade the equipment whether or not. After the upgrading, the equipment will restart. Note: During upgrading, please don’t power off the outdoor device. 3) “Sync with computer time” means through this apply to sync IP outdoor camera system time to local PC time.
5.7.4.6 System-System Log Click “System—System Log” to enter the “system log” menu as follows. At the top of the “Log Search” page are the following filters to facilitate locating the desired file(s): [Time]: Set the starting time and the ending time of the log being searched for. [Type]: Choose from the following options: “All”, “Alarm” and “Operation”. Click the “ ” button after setting the log time and type, and the system will display the selected log in the list.
6. Click the icon “ ” on the right top of the address field to display the Chrome web page in an IE-based page, and fill in the IP address of the outdoor device on the IE-based address bar, then click the icon “ ” to access the remote device, fill in the correct user name and password to log in. Default user name and password are “Admin” and “888888".(shown on the red frames as below) 4. During installation, the following figure will appear, click “Add” to confirm to install “IE Tab” add-on.
3) Change the security level for the “Internet” zone from the default “Medium-high” zone to “Medium". Slide the bar up and down between the different security zones. The “Medium” Internet zone will allow a lower security environment for your web browsing. To go even further with enabling the ActiveX controls, click the “Custom Level” button. Under the “Settings” menu, look for the “ActiveX Controls and Plug-ins” options.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
