User's Manual

21 22
5.4 Quick Setting
2.
2.4.1 System
2.
2.
1)Through the IP outdoor camera connection to network (or PC), and then to the outdoor device
electric start.
2)Copy the quick setting guide program “HiCamSearcher_v1.1.exe” from the installation CD
to user ’s PC, and run it on PC.
Note: if the IP outdoor camera and PC connected directly, PC’s IP address to use manual
distribution methods, and the IP address of the PC network segment and the outdoor
device keep the same network segment.
3)Press "Next" button, pop-up as below interface. Click “Refresh” button and online devices
on LAN will be shown on the list.
Double click one to
access the device.
4)Select a device from the list, and press “Next” button to modify the setting, pop-up as below
interface.
5)Options “IP Address”, “Sub Mask” and “Gate way” can be modified. Click “Modify” button,
pop-up as below interface. Input the device’s right account and password (default account
of administrator is “Admin” and default password of administrator is “888888”).