User's Manual

5.5 System Login

1)Open the web browser, enter the IP address of the device(such as ,

which can be searched by the program “HiCamSearcher_v1.1.exe”.

“http://xxx.xxx.xxx.xxx”)

Note: If the device is connected to the WAN, the IP address should be a public IP address.

The system will automatically enter the GUI as follows.

2) Click “ ”, if users access the device on the PC for the first time, it will pop up a window as

below, click “ok” and install player on the PC according to the following method.

Click “ Download Player ” and download the file “IPDoor.zip” to the PC. Open the zip file to

run the file “IPDoor.exe” and it will install outdoor device’s OCX on the PC (according to the

method as following figures).

3)After installing player on the PC, input the authorized user name and password, the default

user name is “Admin” and the default password is “888888”. Select language “English” or

“Chinese”, choose network stream “Main Flow” or “Minor Flow”, and then click “ ”.

“ ” indicates that it will enter into “Home” interface automatically when the device will

be connected to the web browser again on the same PC.

6)Click “OK” to confirm device parameters configuration.