User's Manual

ManualsBrandsLB Technology ManualsElectronicsIP VIDEO DOOR PHONE

A. LAN Settings

[IP Type]: There are two options: “Fixed IP Address” and “dynamic IP Address”.

After selecting an Internet connection setting - such as fixed IP address (static) or dynamic IP

address (DHCP) – and allocating a port, users can access the IP outdoor camera remotely via

the Internet.

1)If fixed IP address has been selected, it is necessary to set up an IP address, a subnet mask

and a gateway.

[IP Address]: Enter the IP address in this field.

[Subnet Mask]: Input numbers for the subnet mask.

[Gateway]: Enter numbers for the default gateway.

[DNS Type]: Options include “Manual DNS” and “From DHCP Server”. If users select “Manual

DNS”, they have to input numbers for primary DNS and second DNS manually.

2)If DHCP is selected, the server will allocate an outdoor camera IP address automatically.

NOTE: Save the IP address when selecting DHCP and the outdoor camera will automatically

connect with the server. It will allocate an IP address when the connection is stable, and this

address will be displayed on the interface.

B. HTTP

[HTTP Port]: The IP address identity one outdoor device in the network, you can run several

programs on this equipment, and every program will transfer the data through some port, in fact

data is transferred from one port to another. The port setting of this page is asking user choose

which port to transfer the data for the web server. Doing port mapping, need to maintain

consistent with the port (equipment factory default port is 80).Sets up a Web browser port via

HTTP. The default port number is “80”.

[Mobile port]: Mobile monitoring port. And default value is 20510.

C. Network Test

[Wan Test]: In this field, users can fill in the IP address or DDNS address which they set up,

and click “ ” to test the network traffic is normal or not. If all the network parameters are

set correctly, click “ ”

and “Test Success!” will be shown. Otherwise “Test Failure!” will

be shown.

5.7.3.1 Network--Basic Settings

Click “Parameters—Network—Basic Settings” to enter the LAN Settings interface. Default IP

type is “dynamic IP Address”. The user can set up device network parameters through the

operation “Quick Setting Guide”, user can change it according to your network environment.

5.7.3.2 Network--DDNS

Click “Parameters-Network-DDNS”to enter the DDNS setting interface. DDNS setup as follows.

User can use third part DDNS, first user must have a domain name; www.dyndns.org or

www.3322.org is recommended. Please remember the username, password and domain name.

Then enable DDNS, for example, select the DDNS Provider as “3322.org”. If your domain name

is “test.f3322.org”, please enter “test.f3322.org” in the option “Your Domain”, the “Username” and

“Password” is the username and password that applied in the www.3322.org. Click “ ” to

save. Then you can access the device by domain name.

5.7.3.3 Network--Wifi(Optional, please take actual machine as quasi)

For the outdoor device with WIFI function, users can visit the device remotely by the following

methods: through network cable connection or through wireless connection. If through wireless

connection, please use the network cable to connect the device into LAN before doing settings

of wireless connection. Then click “Parameters—Network—WiFi” to enter the Wifi Setting

interface, and according to the below 1-6 steps to do the settings.

1) Open wireless, “ ” indicates WIFI status to be enabled.

2) Click the “ ” button to search the current wireless routers, and all the wireless routers

will appear on the Current Hot Point list.

3) Choose one effective router, click it to choose router SSID.

4) Input correct password of the wireless router in wireless security mode.

5) Click “ ” to check the wireless network is connected successfully or not.

6)When the wireless is connected successfully, click “ ” to save the settings, the device

will be reboot automatically, take away the Ethernet cable, then the wireless network will work

perfectly.

Note: 1. When adjust WIFI status, the device will be reboot after saving the setting.

2. When enable WIFI status, the device will be reboot automatically if plug or unplug the

network cable connected to the outdoor device.

3. Through Wifi connection, the “Network Type” on the Network Basic Setting suggested

to be set as “DHCP”. When configure the parameters about WIFI, user can view the outdoor

device can be allocated IP address whether or not through the search tool “HiCamSearcher”.