User's Manual
3) “Sync with computer time” means through this apply to sync IP outdoor camera system
time to local PC time.
4) “Sync with NTP” will choose a same time zone with the NTP server automatically. Server
name is the NTP server host, and the interval of refresh time includes 1 hour, 2 hours, 12 hours
and 24hous. Save all parameters, then it will update as a network clock.
5.7.4.3 System-Initialize
Click “System—Initialize” to access initialize setting menu. This interface includes settings for
Reboot, Factory Default and Upgrade.
1) Reboot: Click “ ”, it will pop-up a message window “the device will be rebooted. Are
you sure?”, and click “OK” to restart the equipment.
2) Factory Default: Click “ ” , it will pop-up a message window “Set up data will be
initialized. Are you sure?” Click “OK” to restore all the parameters to the default settings
except IP address.
3) Upgrade: Click “ ” to select the firmware file for upgrading, for example, the
firmware file such as “hi3518-96223-V1003-20140421.ov” is on the desktop. First choose the
firmware file, click “ ”, and it will be shown as “ ”,then
click “ ” to upgrade the equipment whether or not. After the upgrading, the equipment
will restart.
Note: During upgrading, please don’t power off the outdoor device.
33
34
5.7.4.4 System-Device Info
Click “System—Device Info” to enter the “Device Information” menu as follows. The information
included accessible through this interface includes: Device Info (Device Name, Device ID,
Software Version, Release date and Start Time), Network Info (Connection, Mac, IP, Subnet
Mask, Gateway, Primary DNS and Second DNS).
5.7.4.5 System-Storage Device
Click “System—Storage Device” to enter the interface of SD card information as follows.
The option “status” for the models without SD card will show “no ready”.
5) “Delay push(s)”: From this field, user can adjust delay duration time of alarm push for visitor
calling, and values can be set from 0 to 60s. For example, to select 5s, if visitor presses the call
button on the outdoor camera, the message will be pushed onto the master’s phone after 5
seconds.