User's Manual

4. During installation, the following figure will appear, click “Add” to confirm to install “IE Tab”
add-on.
5. After complete installation, the icon “ ” will appear on the right top of the browser interface
(Shown on the red frame as below), and it means that IE Tab has been added to Chrome browser.
37
38
6. Click the icon “ ” on the right top of the address field to display the Chrome web page in an
IE-based page, and fill in the IP address of the outdoor device on the IE-based address bar, then
click the icon “ ” to access the remote device, fill in the correct user name and password to log in.
Default user name and password are “Admin” and “888888".(shown on the red frames as below)
Appendix 3 How to ensure reliable remote viewing of the IP
outdoor camera through IE browser on Win 7/Win 8 64bit OS
1. Run 32bit IE on Windows OS (64bit)
Note: On a 64-bit version of a Windows operating system, there are two versions of the
Internet Explorer files:
* The 64-bit version is “C:\Program Files\ Internet Explorer \iexplore.exe”.
* The 32-bit version is “C:\Program Files(x86) \ Internet Explorer \iexplore.exe”.
* Please run the 32-bit version “C:\Program Files(x86) \Internet Explorer \iexplore.exe”.
2. Run Internet Explorer as the Administrator
1) Open folder path “C:\Program Files(x86) \Internet Explorer”.
2) Right click the Internet Explorer icon and choose "Run as Administrator".
3) Click "Continue" in the User Account Control window to grant administrator access to
Internet Explorer.
3. Download ActiveX control after type in IP address & Port
1) Open an Internet Explorer browser window to make changes to your current ActiveX controls.
Click the “Tools” link located at the top of the menu bar. A drop down window will appear with
several more options to choose from. Each option will let you change some of the default
settings already programmed into Internet Explorer.
2) Click the “Internet Options” link located at the end of the list. When the pop-up window
appears, select the “Security” tab to access the ActiveX controls. There are several zones with
multiple security settings. Each zone has preset settings built into it. You can change the
settings to fit your current needs. If for some reason you're not satisfied with these changes,
click the “Reset All Zones to Default Level” to change them back. To allow ActiveX controls to
run, click the “Internet” zone. The icon that identifies this zone looks like Earth.