User's Manual

User Manual
1.1 Feature(Please take actual model as quasi)
1. Description Of IP Outdoor camera
6
5
1 Weather shield Affix and protect outdoor camera from rain or snow.
2 IR LEDs Provides illumination with IR LEDs for better visibility.
3 Camera Capture image to transmit to display
4 Speaker Sound from smart-phone
5 Call button Visitor call for intercommunication
6 Microphone Transmit voice to smart-phone
1.2 Specifications
1.0M
IR LEDs(60 )
60
300mA max.
Camera
1/4 CMOS
External switching power supply DC 12V.
-40~+50 C
Network Interface
10/100M
1.3 Fitting of the IP Outdoor Camera
s
Affixation screw
s
3 pcs
1.4 Wiring Diagram of the IP Outdoor Camera
In the standard delivery the system support locks with Normally Open(N.O.) door unlocking
method. It means that in the normal state the dry contact(marked as ) is opened, so the lock
is kept under constant closed state. If the unlocking button is pressed and the dry contact is
changed to closed, then the lock is released.
Installation CD(with full manual and
android mobile phone software
)
User quick guide
External Switching Power Adapter
1 pcs
1 pcs
1 pcs
System port
7
The terminal is defined functionality as below:
1.GN&WH: To network wire GN&WH 2.GN: To network wire GN
3.OG&WH: To network wire OG&WH 4.OG: To network wire OG
5.RD: DC 12V 6.BK: GND 7/8.BN: To door lock.
Note:
GN--Green, WH--White, OG--Orange, RD--Red, BK--Black, BN--Brown
8
Volume regulator
To be used to adjust the speaker volume.
If the speaker volume is too low, how to increase it?
At the backside of outdoor unit, you can find out a regulator (Marked as ) which is used to
adjust the speaker volume, turn the regulator with the screwdriver to decrease/increase the
speaker volume.
b
7
8
Antenna
(optional)
Indoor antenna(optional)
Outdoor antenna(optional)
1pcs(6dBi or 3dBi)
1pcs(10dBi)
or
Indoor antenna
(optional)
Outdoor
antenna
(optional)
or
Antenna(
optional)
For the models with wired function, connect the doorbell to external
switching power supply(DC 12V), ethernet cable and door lock.
For the models with wireless function, connect the doorbell to external
switching power supply(DC 12V), door lock and indoor antenna or
outdoor antenna, and antenna can be optional.
Antenna(optional)
Antenna connector
(optional)
External switching power supply
DC 12V
1.GN&WH
2.GN
3.OG&WH
4.OG
5.RD:DC 12V
6.BK:GND
7.BN
8.BN
+
-
GN&WH
GN
OG&WH
OG
Network Cable
To Internet
b