User's Manual

Basic configure includes: “Language”, “Standard”, “Color Setup” and “Video margin”.
[Standard]: From this field, select the system output type that is consistent with camera input,
i.e. PAL or NTSC.
[Language]: Use this field to change the language of the device menu text and the on-screen
display.
[Color Setup]
location where the camera is installed.
Click the vertical bar on the slide bar and drag the cursor to the left or right along the slide bar to
set color attributes. Once the color attributes have been set, click “ ” to save the settings.
[Video Margin]
Click “ ” to enter the “Video Margin” menu, the entire video screen can be moved up,
down, to the left, and to the right using this option.
17
Click “ ” to enter the “Color Setup” menu. From
this menu, the video color attributes can be adjusted for
the best image quality. By default, the values are set at
31, as this is the median value. Make adjustments to
the chroma, brightness, contrast, and/or saturation as
appropriate depending on the actual conditions at the
[Date Format]: Left-click to switch the date format, include YY/MM/DD, MM/DD/YY and
DD/MM/YY.
[Date]: Left-click to switch the numerical keypad, and set the date using the numerical keypad.
[Time Format]: Left-click to switch the time format from a 12-hour clock to a 24-hour clock
and vice versa.
[Time]: Left-click to switch the numerical keypad, and set the system time using the numerical
keypad.
2.4.1.1 System-Basic
2.4.1.2 System-Time
Move the cursor to the “Network” icon and left-click to enter the “Network” menu. Network setup
includes: “Basic Setup”, “Port” and “Advanced”.
2.4.2.1 Network-Basic
[Network Link]: There are three options: “Static” and “DHCP”.
After selecting an Internet connection setting - such as static or DHCP – and allocating a port,
users can access the device remotely via the Internet.
1)If static allocation has been selected, it is necessary to set up an IP address, a subnet mask, a
gateway, and a Web port.
[IP Address]: Enter the IP address in this field.
[Subnet Mask]:Input numbers for the subnet mask.
[Gateway]: Enter numbers for the default gateway.
[DNS Address]: Input numbers for the subnet mask in this field.
2)If DHCP is selected, the server will allocate an indoor unit IP address automatically.
Save the IP address when selecting DHCP and the indoor unit will automatically connect
with the server. It will allocate an IP address when the connection is stable, and this address will be
displayed on the interface.
NOTE:
2.4.2.2 Network-Port
2.4.2 Network
18