User's Manual

The left bottom corner of each individual channel is occupied by camera view tools:
/ :Connect the current window view or close the current window view.
/
：Start recording or stop recording of the current channel view. And the right bottom
corner of the current channel has a normal recording video symbol “ ”.
：Takes a snapshot of the displayed image.
：Increase or decrease brightness.
：Increase or decrease image contrast.
: This indicates that the channel has detected motion while in motion-detection mode of
the remote indoor unit.
:Unlock for the door machine. Click this button to access the “Unlock” window(shown as
below), input the correct password and click the button “ ” to confirm.
To use the controls, move the cursor over the icons, which will become highlighted
when selected.
/
Connect all windows or disconnect all windows.
Capture images which can be saved in a local disk (the default system save path is
“c:\IVR\Capture\”).
Quick-start to record video on all channels, and the right bottom corner of each channel
has a normal recording video symbol “ ”(the default system save path is
“c:\IVR\Record\”).
Click this button to talk with the door machine. And click it again to stop.
Click this button to unlock for the door machine.
Click these icons to switch between the single-screen ( ), quad-split( ) and full-screen
( ) options.
Click on the vertical bars to adjust the volume.
1.Select one channel from the preview screen (the color of the selected channel's frame will
change to blue), and double-click the left mouse key will enlarge the current channel view.
And single-click right mouse key as a full-screen display of the selected channel.
2.Single-click right mouse key on the preview screen will maximize all the current channels to
full-screen. And single-click right mouse key again will back out.
Click “Playback” to enter the playback interface.
29 30
3.5.4 Playback
3.5.2 Controls
3.5.3 Other Operations
To search for a recording by date, click calendar in the upper-right corner, and use “ ”and
“ ” to set the month of the video being searched for; click “REFRESH” (located just below the
calendar) to display the recording information of current month.
The highlighted date indicates the recording date of the video being played. Click on a date to
view the recording file list for that day. For example, the preceding figure shows that there are
th th
videos on file that were recorded on November 5 and 7 (indicated by the numbers being in
bold print), and is the recording file list that is currently open is the list of videos recorded on
th
November 5 (indicated by the darker background and the “5” in white text).
Another way to find a video is to select the channel and type of the file in question from the file
list below the calendar. After selecting the channel and type from their respective drop-down
menus at the top of the file list, click “SEARCH” and the results will be displayed in a list like the
one in the following figure.