User's Manual

Double-click one of the listed recorded videos or select one of the listed recorded videos and
then click “PLAY” to begin playback.
Using this button, users can download files to their computers and save them to a
HDD for backup or later viewing. The downloaded file format is “AVI”. The option“ ” on the left
side of the file is available for downloading. “ ” indicates the file will be saved to a HDD after
clicking the “ ” button.
Volum e
Control
Down load status bar
Play status bar
Play Pause Stop Fast play Snap E-zoom
Slow Play Single Frame
The starting time and the ending time of the current downloading file
Click “Remote Setting” to enter the “Remote Setting” setup menu. This interface includes
record setting, alarm setting, network setting, advanced setting, system info, remote upgrade
and user modify, which can all be modified remotely through an Internet browser.
In the sidebar on the left, click “Record Setting” to enter the recording settings menu. From this
page, users can enable or disable recording for channel 3 or channel 4, set recording schedules,
and adjust specific recording parameters, i.e. enabling/disabling audio, setting the pack time,
and setting recording modes.
A.Record Settings
31
32
3.5.6 Remote Setings
3.5.5 Toolbar Guide
B Alarm Settings
From the sidebar on the left, click “Alarm Setting”, then select “Channel Alarm” to enter the
“Channel Alarm” setup interface. From this interface, users can set motion-detection alarms,
define motion-detection privacy masking areas, motion sensitivity, and record duration.
C Network Settings
From the sidebar on the left, click “Network Setting”, and then select “Network” to enter the
network settings interface. The menu allows users to set basic attribute, PPPOE and DDNS
setup.
D Mobile Settings
From the sidebar on the left, click “Network Setting”, and then select “Mobile” to enter the
“Mobile Settings” interface. From this page, users can set ports, push switch and push time.