User's Manual

2.5 System Login
1)Open the web browser, and enter IP address “http://XXX.XXX.XXX.XXX”.
Note: If the device is connected to the WAN, the IP address should be a public IP address.
The system will automatically enter the GUI as follows.
2) Click “ ”,if users access the device on the PC for the first time, it will pop up a window as
below, click “ok” and install player on the PC according to the following method.
Click “ ” and download the file “IPDoor.zip” to the PC. Open the zip file to run the file
“IPDoor.exe” and it will install indoor unit’s OCX on the PC (according to the method as
following figures).
3)After installing player on the PC, input the authorized user name and password, the default
user name is “Admin” and the default password is “888888”. Select language “English” or
“Chinese”, choose network stream “Main Flow” or “Minor Flow”, and then click “ ”.
“ ” indicates that it will enter into “Home” interface automatically when the device will
be connected to the web browser again on the same PC.
6)Click “OK” to confirm device parameters configuration.
21
22