User's Manual

2.7.5 Logout
Click “Logout” to log out of the system.
According to the above figure for example, click “011->20140414->rec001” to enter into the
record list. Click one on the list to playback the record. Click “Parent Folder” to back to the
parent directory.
2.7.4.6 System-System Log
Click “System—System Log” to enter the “system log” menu as follows.
At the top of the “Log Search” page are the following filters to facilitate locating the desired file(s):
[Time]: Set the starting time and the ending time of the log being searched for.
[Type]: Choose from the following options: “All”, “Alarm” and “Operation”.
Click the “ ” button after setting the log time and type, and the system will display the
selected log in the list. Click “ ”, “ ”, “ ”, “ ” to navigate pages, and
click “ ” to delete all the log lists.
33
34
2.7.6 Record(Optional)
The models without SD card can't record.
For the models with SD card, if the SD card was already inserted into the indoor device, when
some visitor press the “Call” button on the outdoor camera, the indoor device will start
recording and the video data will be stored onto the SD card.
The record can playback on PC.
Note: For the models with SD card, the SD card inserted into the indoor device must be
formatted first before using.
3. Mobile Phone Software Visit
This IP video door phone can transmit live feed to your mobile phone, and support P2P for
mobile monitoring, so that you can have 'on the go' access to your surveillance system from
virtually anywhere. To view, you must install a mobile operating system specific program into
your mobile. Currently, there are a limited number of phones that are supported: Google
Android and Apple iPhone or iPad. The Android mobile program is located on the included CD
or downloaded via “Play Store”, and an iPhone mobile program or an iPad program is
downloaded via “APP Store”. In “APP Store” or “Play Store”, please search for
“MobileEyeDoor+”. Please see the instruction manual for your mobile to install the program.
Note:
When users access one indoor device via the software “MobileEyeDoor+” on smart-phone,
you can view the video image of one outdoor camera connected to the device once, and
can’t view all images of outdoor cameras connected to the same indoor unit simultaneously.
3.1 Iphone Mobile or Ipad
The iPhone or iPad application, like all iPhone or iPad applications, needs to be downloaded
directly from the App Store. Open APP store, search for “MobileEyeDoor+”, it's a free
application. The application on the iPad could be searched for “iPad Only” or “iPhone Only”.
(1) “MobileEyeDoor+” installation
According to the following method, open the App store “ ”, touch “ ” and search for
“MobileEyeDoor+”. Install it on the mobile phone or the iPad. After installing “MobileEyeDoor+”,
it will appear a “ MobileEyeDoor+” icon on the application software.
(2)
Click the “MobileEyeDoor+” icon to run the program. Click “ ” to go into next interface,
then click “ ”, first please choose the adding type, there are
three methods to add device: “Scan QR Code”, “Manually enter” and “LAN Search”.
How to use “MobileEyeDoor+”
1>
The device with WIFI function can work in wired network and wireless network. The method to
set up WIFI function of the device and add a new device via a smart-phone please refer to section
.
In wired mode or the indoor device has been connected to a wireless router, use can add the indoor
device via a smart-phone according to the following section.
2.2 Soft AP Function