User's Manual

1) Please go to the android software market “Play Store” to search for “MobileEyeDoor+” and
install it. Or from the installation CD, copy the setup software “MobileEyeDoor+.apk” to user's
Android phone or to SD card.
Open your “File Manager” in android phone, and find out the file “MobileEyeDoor+” in your
android phone memory or SD card. Click it to install the software. When the application has
finished installing, the icon “MobileEyeDoor+ ” will display on the screen of the phone (shown
as below).
3.2 Android Mobile
7> Click “ ”to enter the “System Settings” interface as follows.
[Video Views]: Select “1" and only one channel view will be shown
on live view. Select “4" and quad channels view will be shown on
live view.
[Live Preference]: Options include “Real-time” and “Quality”. If
choose “Real-time”, the video encoder of the channel for remote
access viewing via mobile phone will consider to the frame first;
If choose “Quality”, the video encoder of the channel for remote access viewing via mobile
phone will consider to the image quality first.
[View Preference]: To set up the image display size when view the channel video. Options
include “”original” and “tile”.
2) Click the “MobileEyeDoor+” icon to run the program, click “ ” to the next interface, first please
choose the adding mode “Add a wired device & installed wireless device”, and on the interface
“Select Add way” to select adding type, there are three methods to add device: “Two-dimensional
code scanning”, “Manually enter” and “LAN Search”.
A. Adding by “Two-dimensional Code Scanning”
B. Adding by “Manually enter”
Click “ ” to the next interface, users can scan two-dimensional code attached
to the machine through the mobile phone, and the device UID will be shown.
Click “ ” to the next interface, users can add a new device by UID type or by IP type.
After entering the “IP” Settings menu, the following fields will need to be completed:
a. By IP type
Name: Set name for the indoor unit, and saves settings for future usage.
Address: The public IP address or dynamic domain name of the indoor unit.
Port: The mobile port of the indoor unit for remote access viewing via mobile phone, the
default is “20510”.
User: The user name set for entering the indoor unit system. (Admin by default)
Password: The password set for entering the indoor unit system. (888888 by default)
Channel Number: Select the max channels of the device will be connected.
Click “ ” to save.
Click “UID” to enter the Settings menu, the following fields will need to be completed:
b. By UID type
39
40