User's Manual

12
11
AUDIO
VIDEO
GND
DC12V
AUDIO
VIDEO
GND
DC12V
Unshielded wire
Shielded wire
Shield
Shield
AUDIO
VIDEO
GND
DC12V
AUDIO
VIDEO
GND
DC12V
2.3C ordinary unshielded +video wire（75-3）connection mode：
AUDIO
VIDEO
GND
DC12V
AUDIO
VIDEO
GND
DC12V
≤
（
））
（
）
100
）
（
DC12V
3.CAT5 or CAT6 network cable connection mode：（Not recommended)
Unshielded network cable
Shield
AUDIO
VIDEO
GND
DC12V
20
（
）
）
40
）
（
(
80m)
50m)
AUDIO
GND
VIDEO
DC12V
AUDIO
GND
VIDEO
DC12V
AUDIO
GND
VIDEO
Shielded network cable
Shield
1.6 Installation Process of Indoor Units
150-160cm
* Select the most suitable position where the monitor is located at user's eye level.
* Switch off power supply before installing.
* Keep more than 30cm away from AC power supply to avoid external interference.
* Keep it away from the water and magnetic field.
To install the indoor unit , please follow these steps as below:
NOTE:
* Avoid installation of the device near strong radiation e.g. TV set, video recorder and PC
etc.
* Avoid hard shake , beating and collision ,otherwise the internal exact components
maybe be damaged .
* Maintenance should be complied with a qualified technician.
B. For the non-visual indoor unit
Plastic anchors
Bracket
Connection
cable
Plastic anchors
Connection Cable
Screws
A. For the visual indoor unit with 4 inch or 7 inch LCD TFT