User guide

2
Install the Transformer
CROSSBAR
#8-32 FLAT
HEAD SCREW
Remove the two #8-32 flat head screws to remove the
crossbar.
#8-32
SCREW
CROSSBAR
Mount the crossbar to the electrical box with the provided
two #8-32 screws.
CAUTION: Turn the power to electrical box off!
Slide the transformer onto the crossbar.
Align the transformer holes with the crossbar holes; replace
and tighten the two #8-32 flat head screws.
#8-32
SCREW
SAFETY WIRE
CROSSBAR
BRACKET
Hook the transformer safety wire onto the backplate bracket.
Connect the backplate to a suitable ground in accordance with
local electrical codes.
For each set of power line wires, connect the hot and neutral
wires to the black and white transformer wires, respectively.
NOTE: All transformer power line wires must be
connected to the same phase.
1A1A 1A1C
1A1B
1A1D
2
1
2
3
4
6
5
1 1
7
3
2
7
7
5
5