User guide

Installation Instructions for

Dahling Grande Pendant

980DHLNGGS

Suspension

1.0

LF608GO_2D

Assemble the Fixture

Use 120 voltMAX 75 Watt

Type A19 Medium Base Lamp.

Screw the new lamp into the socket.

SOCKET

LAMP

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

Place the hardware inside the glass shade and install the

three mounting rods by screwing them in completely.

MOUNTING ROD

GLASS

SHADE

CAUTION - RISK OF FIRE

This product requires installation by a qualified

electrician. Before installing be sure to read all

instructions and TURN THE POWER TO THE

ELECTRICAL BOX OFF.

CAUTION: Due to the fixture’s weight,

assistance will be needed for installation.

PAGE 1
Installation Instructions for 980DHLNGGS Dahling Grande Pendant LF608GO_2D 1.0 Suspension GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. CAUTION - RISK OF FIRE This product requires installation by a qualified electrician. Before installing be sure to read all instructions and TURN THE POWER TO THE ELECTRICAL BOX OFF. C AUTION: Due to the fixture’s weight, assistance will be needed for installation.
PAGE 2
Replacing the Lamp 2A GLASS SHADE SOCKET LAMP C AUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. SAVE THESE INSTRUCTIONS! Use MAX 120 volt 75 Watt Type A19 Medium Base Lamp. 1 Reach inside the glass shade and unscrew the old lamp, then screw in the new lamp into the socket. 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2012 LBL Lighting.All rights reserved.