Manual

CEILING

ANCHOR

Installation Instructions for

Fusion Jack Swag Hook

1.0

FJ-SWAGHOOK-_

980FSJSHOOK

GP I :ENERAL RODUCT NFORMATION

This product must be used with Fusion Jack fixtures only.

Mark a point on the ceiling near the fixture where the swag

hook is to be mounted.

Push the anchor at the marked point into the ceiling up to the

threaded portion.

Mount the Swag Hook

THREADED

WASHER

CEILING

ANCHOR

Screw the anchor in the rest of the way with a Phillips

screwdriver.

Mount the threaded washer to the anchor with the #8 screw.

Screw the swag hook to the threaded washer.

SWAG HOOK

#8 SCREW

THREADED

WASHER

Fusion Jack™

1B 1D

PAGE 1
Installation Instructions for 980FSJSHOOK Fusion Jack Swag Hook FJ-SWAGHOOK-_ 1.0 Fusion Jack™ GENERAL PRODUCT INFORMATION: This product must be used with Fusion Jack fixtures only. Mount the Swag Hook 1A 1C 2 ANCHOR CEILING 1 Mark a point on the ceiling near the fixture where the swag hook is to be mounted. 2 Push the anchor at the marked point into the ceiling up to the threaded portion. THREADED WASHER 4 #8 SCREW 4 1B Mount the threaded washer to the anchor with the #8 screw.
PAGE 2
1E PENDANT WIRE 6 ALLEN WRENCH SET SCREW 6 Hook the fixture cord into the swag hook and tighten the M4 set screw snugly with the provided 2 MM Allen wrench. SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.